EnergyBS
    Induction

    Induction Stove Rebates 2026: What Still Pays, What Ended, and the Real Cost of Switching

    The federal electric stove rebate still lists up to $840, but since DOE Program Notice 26-2 (effective May 29, 2026) it only pays when an induction or electric range replaces an existing electric one, or goes into new construction. A gas-to-induction switch now gets nothing from that program. What still pays for a gas swap is utility money, such as Mass Save's $500 for an induction stove that replaces a verified gas or propane stove in 2026. In Ontario, Home Renovation Savings pays $150 when an induction cooktop or range replaces an electric one. This guide lists what we confirmed, what ended, the full cost of switching (range, circuit, panel, cookware), three worked examples and a stacking worksheet.

    EnergyBS Editorial TeamUpdated Published 16 sources22 min read
    Induction Stove Rebates 2026: What Still Pays, What Ended, and the Real Cost of Switching

    Quick Checks

    • 1Replacing a gas stove with induction? The federal $840 rebate no longer covers that swap. DOE Program Notice 26-2, effective May 29, 2026, limits the rebate to replacing existing electric equipment or to new construction.
    • 2Replacing an old electric coil or smooth-top range with induction? That is the case the federal rebate still covers, in states that include stoves: up to $840, and 100% of cost under 80% of area median income or 50% from 80% to 150%.
    • 3Utility money still pays for gas-to-induction swaps in some places. Mass Save pays $500 for an ENERGY STAR induction stove that replaces a verified gas or propane stove bought in 2026.
    • 4In Ontario, Home Renovation Savings pays $150 for an induction cooktop or range, but only when it replaces an existing electric appliance. Apply within 60 days of purchase.
    • 5There is no federal tax credit for a stove. Stoves were never in Section 25C, and 25C itself ended for property placed in service after December 31, 2025.
    • 6Price the circuit before the range. A dedicated circuit runs $250 to $900 (HomeGuide), and a full panel upgrade from 100 to 200 amps runs $1,300 to $4,200, which can dwarf any stove rebate.
    On this page(15 sections)Show
    1. Induction Stove Rebates 2026: What Still Pays, What Ended, and the Real Cost of Switching
    2. The Short Answer
    3. What Changed in 2026: The Fuel-Switching Rule
    4. The Federal Stove Rebate, Line by Line
    5. Where the Stove Rebate Has Actually Launched
    6. The $2,500 Wiring and $4,000 Panel Lines
    7. Utility Rebates That Still Pay for Induction
    8. Canada: Provincial and Utility Programs
    9. What Is No Longer Available
    10. The Full Cost of Switching to Induction
    11. Three Worked Examples
    12. The Stacking Worksheet
    13. Before You Buy: Seven Checks
    14. Frequently Asked Questions
    15. Related Reading

    Induction Stove Rebates 2026: What Still Pays, What Ended, and the Real Cost of Switching

    By EnergyBS Editorial Team | Updated November 13, 2026

    The Short Answer

    Short Answer: The federal electric stove rebate still lists up to $840, but since DOE Program Notice 26-2 took effect on May 29, 2026 it only pays when an induction or electric range replaces an existing electric range, or goes into new construction. If you are swapping a gas stove for induction, that federal money is gone. What can still pay for a gas swap is utility money: Mass Save, for example, pays $500 for an ENERGY STAR induction stove that replaces a verified gas or propane stove bought in 2026. In Ontario, Home Renovation Savings pays C$150 when induction replaces an existing electric cooktop or range.

    So the honest headline for 2026 is smaller than the one most rebate pages still carry. A gas household that switches to induction should plan to pay for the range, the 240-volt circuit and possibly a panel upgrade almost entirely out of pocket, with a utility rebate of a few hundred dollars where one exists. An electric household on a moderate or low income, in a state that has opened its rebate program and included stoves, can still have up to $840 of a new induction range covered.

    Every amount on this page carries its jurisdiction and the date we read the official page (November 13, 2026). Programs here change by notice, not by calendar, so check the program page on the day you buy.


    What Changed in 2026: The Fuel-Switching Rule

    The federal rebate most articles describe was created by the Inflation Reduction Act as the High-Efficiency Electric Home Rebate Act, run by states as HEAR (Home Electrification and Appliance Rebates). Its per-item caps have not changed: $840 for an electric or induction stove, cooktop, range or oven, $2,500 for electrical wiring, $4,000 for an electric panel, and a $14,000 household total, per Rewiring America's summary of the federal rules.

    What changed is who can use the stove line. Disbursements were paused in January 2025. When DOE released new guidance on June 1, 2026 (Program Notice 26-2, effective May 29, 2026), it did three things that matter to a cook:

    1. It removed fuel switching. The notice removes "program allowances for upgrades for fuel-switching (i.e. replacement of non-electric appliances)" and allows rebates "for upgrading HVAC and appliances only from existing electric equipment." A gas or propane range is a non-electric appliance, so replacing one with induction no longer qualifies under new reservations.
    2. It kept new construction. Electric appliances in new construction stay eligible.
    3. It renamed the program from Home Electrification and Appliance Rebates to High-Efficiency Electric Home Rebates (HEEHR), and gave launched state programs three months to adopt the changes.

    The notice does not name stoves specifically. The trade press read it the obvious way: Appliance News, reporting on the September 1 transition, uses a gas range replaced by an induction range as the example of a project that new reservations no longer support. Wisconsin's own program now says it in plain words: electric cooking appliances qualify only when replacing existing electric equipment, and from September 1, 2026, retail instant discounts and post-purchase requests are not accepted for equipment replacing fossil fuel appliances.

    If you reserved a rebate before your state's transition, read your voucher or approval letter. Wisconsin, for example, honours Lowe's instant discount coupons issued before September 1, 2026 until the coupon's own expiry date. A reservation made after your state's switchover follows the new rules.


    The Federal Stove Rebate, Line by Line

    Here is what the rebate pays when it does apply. These are federal caps; each state chooses which items to fund and may set tighter limits.

    Item Federal cap Household under 80% of area median income (AMI) Household at 80% to 150% of AMI Household above 150% AMI
    Electric or induction stove, cooktop, range or oven $840 Up to 100% of cost, to $840 Up to 50% of cost, to $840 Not eligible
    Electrical wiring $2,500 Up to 100% of cost, to $2,500 Up to 50% of cost, to $2,500 Not eligible
    Electric panel (load service center) $4,000 Up to 100% of cost, to $4,000 Up to 50% of cost, to $4,000 Not eligible
    Household total, all items $14,000

    Source: Rewiring America summary of the federal program rules, and Focus on Energy (Wisconsin), both read November 13, 2026.

    Three details in that table trip people up.

    The 50% rule cuts the stove line in half for most buyers. A moderate-income household buying a $1,200 induction range gets 50% of the cost, which is $600, not $840. The $840 cap only binds for that household once the range costs $1,680 or more. Under 80% of AMI, the rebate can cover the whole cost up to $840.

    Area median income is local. The test is your household income against your county or metro area's median for your household size, not a national number. New Mexico's program, for example, uses county AMI, with a statewide example of $63,100 for a four-person household at the 80% line in its table. Our HEEHR income limits guide walks through the 80% and 150% tests and the documents states ask for.

    Renters: check your state. Some state programs accept renters with landlord permission, and some route rental-unit rebates through the landlord. Ask the program office who must apply.


    Advertisement

    Where the Stove Rebate Has Actually Launched

    There is no single official list of which states fund stoves. DOE's own program page (last updated July 8, 2026) says only that rebates are "now available in select states" and points readers to their state energy office. Rewiring America listed 12 states and DC with rebates available as of December 16, 2025: Arizona, California, Colorado, Georgia, Indiana, Maine, Michigan, New Mexico, New York, North Carolina, Rhode Island, Washington DC and Wisconsin, with a warning that some had since paused or been delayed. Being on that list means a program exists, not that it pays for stoves.

    Here is what we confirmed on official state pages on November 13, 2026:

    State Program status on the official page Stove rebate What it means for an induction buyer
    Wisconsin (Focus on Energy) Open Up to $840 by store purchase; only when upgrading from an existing electric appliance The clearest current example: electric to induction qualifies, gas to induction does not since September 1, 2026
    New Mexico (ECAM) Open since September 3, 2024, in phases, to about summer 2028 Up to $840, one per household, ENERGY STAR, installed by an Authorized Program Contractor The page still described the stove as replacing a non-electric model when we read it. Federal rules changed after it was written, so confirm which swaps the state accepts today before buying
    New York (NYSERDA EmPower+) HEAR measures available Not listed: the FAQ said NYSERDA anticipated adding induction stoves, cooktops and ranges in 2025, with no amount Check NYSERDA before assuming a stove rebate exists
    Rhode Island (OER) Income-eligible pathway launched September 17, 2024; moderate-income pathway under development No appliance amounts on the page Ask the program office (the page lists Energy.HEAR@energy.ri.gov)
    New Hampshire (NH DOE) Not available to consumers (page last updated April 17, 2024) Listed at $840 in the plan, not open Nothing to claim today
    Arizona, Georgia Named by Appliance News on August 31, 2026 as moving to the revised rules Not confirmed on an official page for this guide Check the state energy office

    Two more states have their own pages on this site with the official details we confirmed for heat pumps and other measures: Colorado's Home Energy Rebate Program and the Washington HEAR program. Read them for program status, then confirm the stove line on the state page, because neither page was written to answer the induction question.

    How to find your state's answer in five minutes: search for your state energy office plus "home energy rebates," open the measure list, and look for a line that says electric stove, cooktop, range or oven. Then look for three words in the eligibility notes: "existing electric." If they are there, the program has adopted the 2026 fuel-switching rule.


    The $2,500 Wiring and $4,000 Panel Lines

    For a gas household, the stove itself was never the expensive part. The circuit and the panel were. That is why the wiring and panel lines of the federal rebate mattered so much to induction buyers, and why the 2026 change hurts most here.

    What the notice says. Program Notice 26-2 lets eligible households claim "electrical wiring projects incrementally," up to the item cap. It does not mention panels at all. Wisconsin's program, read on November 13, 2026, still lists the panel at up to $4,000 and wiring at up to $2,500, both through a Registered Contractor and both excluded from new construction.

    What it means in practice. Whether a gas household can still use the wiring or panel line for an induction project now depends on how the state wrote its revised program, because the project that needs the wiring (a gas-to-electric swap) is the kind the notice removed. An electric household that needs a new circuit or a bigger panel for some other qualifying upgrade is in a clearer position. Ask the program office one direct question: "Can I claim the wiring or panel line if the appliance I am replacing is a gas range?" Get the answer in writing.

    What the work costs. A dedicated circuit runs $250 to $900, a new breaker $150 to $300, and an electrical permit $50 to $350, per HomeGuide's 2026 cost guide. A full panel upgrade from 100 to 200 amps runs $1,300 to $4,200 installed, depending on the market, per our electrical panel upgrade cost guide. If the panel is the bottleneck, a load management device or a smart panel can sometimes avoid the upgrade; Smart Panel or Load Management? Electrifying a 100-Amp shows when that works.


    Utility Rebates That Still Pay for Induction

    Utility programs are funded separately from the federal rebate, so the May 2026 notice did not touch them. Some of them pay specifically for replacing gas. These are the ones we confirmed on the utility's own page on November 13, 2026:

    Utility or program Where Induction rebate Key conditions
    Mass Save Massachusetts, customers of the sponsoring utilities $500 for an ENERGY STAR induction cooktop or stove ($250 for electric radiant) The existing stove must be natural gas or propane, verified before removal; one per account; purchases January 1 to December 31, 2026; apply by February 28, 2027
    Silicon Valley Power City of Santa Clara, California $750 for an electric range with induction cooktop; $250 for an induction cooktop alone Income-qualified customers may get a bonus of up to $200; page updated July 7, 2026

    Many other utilities, especially municipal utilities and co-ops, run their own induction offers, and third-party rebate finders list dozens of them. We did not list an offer here unless we read it on the utility's own page, because these offers open and close mid-year. To find yours: open your electric utility's residential rebates page and search for "induction," "cooktop" or "range," then do the same on your gas utility's page, since some gas utilities fund electrification too.

    The useful pattern from the two confirmed offers: Mass Save requires the old stove to be gas or propane, which is the opposite of the federal rule. In Massachusetts, a gas-to-induction swap gets $500 from Mass Save and nothing federal. An electric-to-induction swap gets nothing from that Mass Save offer. Read the condition line before the amount.


    Canada: Provincial and Utility Programs

    There is no federal Canadian rebate for an induction cooktop. The federal programs that pay homeowners in 2026 are built around heat pumps and envelope work; our guide to Canada's federal energy rebates in 2026 covers what ended and what is left.

    The provincial program we confirmed is Ontario's:

    • Ontario, Home Renovation Savings (Save on Energy and Enbridge Gas): C$150 for an induction cooktop or range, read November 13, 2026. You must be a residential customer on the Ontario electricity grid (Cornwall Electric customers are excluded), the new appliance must replace an existing electric appliance, used or refurbished units do not qualify, and the application goes in within 60 days of purchase. Like the US federal rule, it rewards electric-to-induction, not gas-to-induction. The program's heat pump and insulation side is covered in our Ontario energy rebates guide.

    Other provinces: we did not find a confirmed residential induction rebate on the official pages we checked for this update. efficiencyPEI runs a year-round appliance rebate program whose page (published January 5, 2026) does not say whether cooking appliances are on its eligible list, so call efficiencyPEI before counting on it. In British Columbia and Quebec, earlier claims of $100 to $250 mail-in induction rebates from the provincial utilities could not be confirmed on their current pages, and we removed them. If you are outside Ontario, check your electric utility and your province's efficiency agency directly.


    What Is No Longer Available

    These are the incentives readers most often still count, and should not:

    Incentive Status in 2026 What to do instead
    Federal $840 rebate for gas-to-induction swaps Removed for new reservations by DOE Program Notice 26-2 (effective May 29, 2026); states had three months to adopt it Look for a utility rebate that pays for fuel switching, such as Mass Save
    Retail instant discounts for fossil fuel replacements in Wisconsin Ended September 1, 2026 Electric-to-induction swaps still qualify; coupons issued before September 1 are honoured to their expiry date
    Section 25C federal tax credit Ended for property placed in service after December 31, 2025. It never covered stoves; it did cover panels, up to $600 Do not let a quote subtract a tax credit for a 2026 panel
    Section 25D residential clean energy credit (solar, batteries) Ended December 31, 2025 Not relevant to a stove, but it removes the solar-plus-battery path some induction buyers planned for outage cooking
    New Hampshire HEAR Not open to consumers Nothing to claim
    Unconfirmed BC and Quebec induction mail-in rebates Not found on current official pages Check your utility directly

    Our IRA tax credit explainer has the 25C and 25D dates and the IRS references.


    The Full Cost of Switching to Induction

    A rebate is a discount on one line of a bill with four or five lines. Here is the whole bill, line by line, with the source of each number.

    1. The range or cooktop. This is your quote. Induction ranges span a wide price band by size, oven features and brand, and a rebate's 50% rule means the price you pay changes the rebate you get. Put your actual quote into the worksheet below, not an average.

    2. The 240-volt circuit. A gas range plugs into a 120-volt outlet that powers only the clock and igniter. An induction range needs a dedicated 240-volt circuit, typically 40 or 50 amps; the exact requirement is on the range's installation sheet. A dedicated circuit runs $250 to $900 (HomeGuide), plus a permit of $50 to $350. Our induction range installation guide covers breaker size, wire gauge, receptacle type and the questions to ask before the delivery truck arrives.

    3. The panel, if it has no room. If the panel has no space for a two-pole breaker or the load calculation does not allow another 40 to 50 amps, the options are a tandem-breaker rework, a load management device, or a panel upgrade at $1,300 to $4,200 for 100 to 200 amps. This single line can cost more than every other line combined.

    4. Capping the gas line. A licensed gas fitter or plumber should disconnect and cap the gas supply at the range. Get it on the quote; some municipalities require a permit for it.

    5. Cookware. Induction needs pans with a magnetic base. The test is simple and free: if a fridge magnet sticks firmly to the bottom of a pan, it works on induction. Cast iron and most stainless steel pass; aluminum, copper and glass usually do not. Count the pans that fail before you budget for replacements.

    6. Running cost. This is the line most people get backwards. Using ENERGY STAR's efficiency figures (induction about 85%, electric resistance 75% to 80%, gas about 32%) and recent EIA national residential prices, the cooktop's running cost barely moves when you switch. Our gas, dual fuel and induction range comparison works the numbers: at US average prices, a typical cooktop costs roughly $24 a year on gas and $35 a year on induction. Induction is the more efficient appliance, but electricity costs more per unit of energy than gas, so a gas household should not expect savings on the bill. The case for switching is speed, control, cleaning and indoor air, covered in Induction vs Gas Cooking.


    Three Worked Examples

    These examples use labelled assumed quotes so the arithmetic is visible. Swap in your own quotes; the rebate rules and the circuit and panel ranges are the sourced parts.

    Example 1: Wisconsin, electric coil range to induction, moderate income

    • Household income: 120% of county AMI (moderate income).
    • Existing range: electric coil, on a working 240-volt, 50-amp circuit.
    • Assumed quote: induction range $1,400 installed, haul-away included.
    • Federal stove rebate (Focus on Energy): 50% of $1,400 = $700, under the $840 cap.
    • Circuit work: none.
    • Net cost: $1,400 minus $700 = $700.

    This is the case the 2026 rules were written for. The rebate is real, it applies at the store, and nothing else in the house changes.

    Example 2: Massachusetts, gas range to induction, any income

    • Existing range: natural gas, 120-volt outlet only; panel has two free spaces and the load calculation allows a 50-amp circuit.
    • Assumed quote: induction range $1,800.
    • Circuit: HomeGuide's range is $250 to $900; assume $600 including breaker and permit.
    • Gas cap: on the plumber's quote; assume $200 for this example.
    • Federal stove rebate: $0 (gas-to-induction, removed by Program Notice 26-2).
    • Mass Save rebate: $500 (gas stove verified before removal).
    • Net cost: $1,800 + $600 + $200 minus $500 = $2,100.

    Notice where the money goes. The rebate covers less than the circuit. If you had read a 2025 rebate article and planned on $840 federal plus $500 Mass Save plus wiring money, you would be $840 or more short.

    Example 3: Ontario, electric smooth-top range to induction

    • Existing range: electric smooth-top on a working 240-volt circuit.
    • Assumed quote: induction range C$1,900.
    • Home Renovation Savings: C$150 (replacing an existing electric appliance; apply within 60 days).
    • Net cost: C$1,900 minus C$150 = C$1,750.

    If the same Ontario household had a gas range, the C$150 would not apply, and the full circuit cost would land on top of the range price.


    The Stacking Worksheet

    Fill one row per incentive, in this order, and stop at any row whose condition you fail. The order matters because some programs reduce the cost that the next program's percentage applies to; ask each program whether it calculates its share before or after other rebates.

    Step Line Your number Condition to check
    A Range or cooktop quote $ ENERGY STAR model if any program requires it
    B Circuit, breaker and permit $ Range installation sheet: amps and receptacle
    C Panel work, if needed $ Load calculation by the electrician
    D Gas line cap $ Licensed gas fitter; permit if local rules require one
    E Cookware you must replace $ Magnet test on every pan you use weekly
    F Gross cost (A to E) $
    G Federal stove rebate (HEEHR) minus $ Existing electric range, state has opened stoves, income under 150% AMI, reservation before purchase where required
    H Federal wiring or panel line minus $ Written confirmation from the state that your project qualifies
    I Utility rebate minus $ Read the old-appliance condition: gas required (Mass Save) or electric required (Ontario)
    J Provincial or municipal program minus $ Pre-approval or application window
    K Net cost (F minus G to J) $

    Two rules for using it. First, never count a rebate you cannot point to on an official page dated this month. Second, if a program needs pre-approval, the reservation date is the date that counts, not the purchase date.


    Advertisement

    Before You Buy: Seven Checks

    1. Name your old appliance correctly. Gas, propane or electric decides which programs you can use. Photograph the old range's rating plate before it leaves the house; Mass Save requires verification of a gas or propane stove before removal.
    2. Check income first. If your household is above 150% of AMI, skip the federal lines entirely and go straight to utility rebates.
    3. Reserve before you buy, where required. Many state programs issue a voucher or approval before purchase. A receipt dated before the reservation is a common reason for denial.
    4. Price the circuit before the range. If the electrician finds the panel full, the panel line can exceed $4,000 and change the whole decision.
    5. Use a registered or authorized contractor where the program requires one. Wisconsin's wiring and panel lines and New Mexico's stove line both name one.
    6. Keep every document. Invoice with model number, ENERGY STAR proof, permit, contractor registration, photographs of the old unit. Claims fail on paperwork far more often than on eligibility; our rebate documentation checklist lists what to save.
    7. Re-check the program page on purchase day. Every program in this guide changed at least once in 2026.

    For combining several upgrades (a heat pump, a water heater and a range) under the household cap, the state energy rebate stacking guide shows the order that works.


    Frequently Asked Questions

    Is there still an $840 rebate for an induction stove in 2026?

    Yes, but only in narrower cases than before. The federal cap is still $840 for an electric or induction stove, cooktop, range or oven. Since DOE Program Notice 26-2 (effective May 29, 2026), it pays only when the new appliance replaces an existing electric one, or in new construction, and only in states that opened the program and chose to fund stoves. Income must be under 150% of area median income.

    Can I get a rebate for replacing a gas stove with induction?

    Not from the federal program under new reservations. Some utilities still pay for it: Mass Save pays $500 for an ENERGY STAR induction stove that replaces a verified gas or propane stove bought in 2026. Check your electric and gas utilities' rebate pages.

    Which states have launched the electric stove rebate?

    DOE does not publish a list. Rewiring America listed 12 states and DC with rebates available as of December 16, 2025. On official pages read November 13, 2026, Wisconsin pays up to $840 for an electric stove replacing an existing electric appliance, and New Mexico lists up to $840 for income-eligible households. New Hampshire's program is not open, and New York's FAQ lists no stove amount.

    How much does the federal rebate pay if I am moderate income?

    Up to 50% of the cost, capped at $840. On a $1,200 induction range that is $600. Households under 80% of area median income can have up to 100% covered, to $840.

    Does the rebate cover the electrical work for an induction range?

    The federal program has separate lines of up to $2,500 for wiring and $4,000 for a panel. After the 2026 change, whether you can use them for a gas-to-induction project depends on your state's revised rules, so ask the program office in writing. A dedicated circuit typically costs $250 to $900 (HomeGuide).

    Is there a tax credit for an induction stove?

    No. Stoves were never covered by the Section 25C credit, and 25C ended for property placed in service after December 31, 2025.

    Are there induction rebates in Canada?

    Ontario's Home Renovation Savings pays C$150 for an induction cooktop or range that replaces an existing electric appliance, with the application due within 60 days of purchase. We did not find a federal Canadian induction rebate or a confirmed program in other provinces on current official pages.

    Will switching to induction lower my energy bill?

    Usually not by much, and a gas household may pay slightly more. Induction is about 85% efficient against about 32% for gas (ENERGY STAR), but electricity costs more per unit of energy. At US average prices, a typical cooktop costs roughly $24 a year on gas and $35 on induction.


    What to Read Next

    Are Premium Gas Ranges Still a Good Buy vs Induction?Use this next to compare the cost, incentive, installation, or operating-risk angle before you make a home energy decision.

    Sources and Verification

    Editorial Review

    EnergyBS Editorial Team

    EnergyBS publishes practical homeowner guides. Important program, product, and cost claims should be checked against the linked source and local project documents before you commit to work.

    Last reviewed Nov 13, 2026. Read our editorial policy and methodology, or report an error.

    Important: Educational Purposes OnlyThe guides, tools, cost estimates, and ROI calculators provided on EnergyBS.com are for informational and educational purposes only. They do not constitute certified financial, tax, or professional engineering advice. Energy costs, government rebates, and installation fees vary significantly by location and are subject to change. Always consult with certified local professionals before undertaking home energy projects or making financial commitments.